OEM / ODM Custom Made Precision Sheet Metal Stamping Part For Auto
| OEM / ODM Custom Made Precision Sheet Metal Stamping Part For Auto |
| Material | Non-ferrous alloy material like carbon steel,stainless
steel,galvanized steel,aluminum,copper,brass,etc |
| Surface Finish | All kinds of surface treatment are available like chrome
plating,zinc plating,nick plating,powder coating,e-coating,dip
coating,mirror polishing,etc. |
| Application | Electronic/Appliance/Auto/Industrial equipment metal stamping
hardware parts |
| Processing | Our process includes tooling fabrication,stamping,deep
drawing,punching, spinning,laser cutting,bending,seamless
welding,machining and assembly |
| Design | Customized designs are Accepted and Welcomed |
| Available Certificate | ISO 9001,SGS,Material Certificate |
| Accident Prevention | Safety Operation Management |
| Quality Control | Liability System and Periodical QC on line every hour |
| Main Market | USA/Germany/Canada/Italy/United
Kingdom/Australia/Pakistan/French,etc |
Bending: When you are designing the bends into your stamped metal part, it
is important to allow for enough material — make sure to design
your part and its blank so that there is enough material to perform
the bend. Some important factors to remember:
- If a bend is made too close to the hole, it can become deformed.
- Notches and tabs, as well as slots, should be designed with widths
that are at least 1.5x the thickness of the material. If made any
smaller, they can be difficult to create due to the force exerted
on punches, causing them to break.
- Every corner in your blank design should have a radius that is at
least half of the material thickness.
- To minimize instances and severity of burrs, avoid sharp corners
and complex cutouts when possible. When such factors cannot be
avoided, be sure to note burr direction in your design so they can
be taken into account during stamping
Coining: This action is when the edges of a stamped metal part are struck
to flatten or break the burr; this can create a much smoother edge
in the coined area of the part geometry; this can also add
additional strength to localized areas of the part and this can be
utilized to avoid secondary process like deburring and grinding.
Our company has strong R&D capability and develops many new
products every year. In production, we strictly follow the ISO 9001
quality system to control quality and arrange production:
1. Don’t accept defective, strict inspection of supplier's raw
materials.
2. Don’t manufacture defective, the production process is strictly
controlled. For all products, the workers are strictly
self-inspected on each machining process, and the quality
inspectors do a regular inspection and spot inspection.
3. Don’t transferring defective, the defective products found in
the previous process shall never be allowed to be transferred to
the next process. Before shipment, the finished products shall be
inspected again, and if any quality problems are found, and the
products shall be reworked or rejected according to the relevant
requirement.
Q1. | What is your main products? |
A1: | Our main products are stamping parts and machined parts. |
Q2. | How to ensure that every process's quality? |
A2: | Every process will be checked by our quality inspection department
which insures every product's quality. In the production of
products, we will personally go to the factory to check the quality
of products. |
Q3. | How long is your delivery time? |
A3: | Our delivery time is generally 30 to 45 days. Or according to the
quantity. |
Q4. | What is your payment method? |
A4: | 30% value of T/T in advance and other 70% balance on B/L copy. For
small order less than 1000USD, would suggest you pay 100% in
advance to reduce the bank charges. |
